Open the wall stand holder from the device and remove the battery cover.
Insert the battery and connect the wires to the port.
Connect the charger provided. The device should start and show readings.
To Switch OFF the device. Press and hold the button for 10-12 seconds.
To Switch ON the device. Press and hold the button for 2-3 seconds and release.
To go to AP Mode Setup(to be used while setting Wi-Fi).
Press and hold the button for 3-6 seconds.
To Reset the device. Click on the button for 2-3 seconds and release.
Download the app from the google play store from the following link
Install the app on your phone or tablet.
While installing if it shows "Block by play protect". Click on "Install Anyway".
Go to App Store
Install TestFlight application
Open the TestFlight application
Click on the Redeem button on top-right and enter the code provided above.
The DAP App will be shown below.
Click and Install.
login using the username / password provided to you over email.
Go to the profile by clicking on the top right icon in the app. Please disconnect the mobile data before adding a device as it might interfere with the connection while setting up.
Press the top switch on the device for 3 seconds the device will go to Wi-Fi mode and will be ready for connection, which will be displayed in the device screen.
Click on Add a device, in the mobile app. Please see the device name displayed on the right-hand side of the device and note it.
Click on confirm and it will take you to the Wi-Fi settings of the mobile.
Connect to the device Wi-Fi which will be of the same name as that of the device you have noted above.
Enter the Wi-Fi SSID (Name) and Password of the Wi-Fi Network via which device will connect to Internet.
Click on connect and after few seconds you will receive a connection successful message in the mobile app as well as the device.
Switch on your mobile data.
Please verify by checking the device top panel, in the top right the Wi-Fi icon should now be showing connected.
Your app should now show the corresponding data from the device.